Srixon and Cleveland Golf are sibling brands under the same corporate parent — Sumitomo Rubber Industries, the Japanese manufacturer that owns both through its Dunlop Sports arm. For golfers, that matters: joint fitting events, shared authorized fitter networks, and the ability to get fitted for Srixon irons and Cleveland wedges in the same appointment are all practical results of that ownership. This guide explains what a fitting session covers for each brand, what makes Cleveland's wedge fitting genuinely useful, how to find an authorized fitter near you, and when a brand-specific session beats going to an independent multi-brand studio.
If you are new to fitting, the complete golf club fitting guide covers the fundamentals before you book any brand-specific session.
Srixon and Cleveland: the same family, different specialities
Srixon is the iron and driver brand. Cleveland is the wedge brand. They share ownership, authorized fitter networks, and many fitting events — but they target different parts of your bag. If you are seriously evaluating Srixon irons, you are almost certainly also evaluating Cleveland wedges, and that is exactly the kind of combined fitting appointment the shared network is built for.
- Srixon irons: the ZX series covers the full player spectrum, from the ZX5 Mk II (player-distance, with a mid-sized head suited to 10–18 handicaps) to the ZX7 Mk II (a compact players' iron with thin toplines for better ball-strikers). Both are 1020 carbon steel forgings. Srixon also produces the ZX line of drivers, fairway woods, and hybrids.
- Cleveland wedges: the RTX series is Cleveland's flagship — the RTX 6 ZipCore is their current tour-played model. Cleveland builds wedge fitting around interchangeable head options: different lofts (46° to 64°), bounce angles (4° to 14°), and four sole grinds (Full, Low, Mid, High). Testing multiple combinations in one session is the core of Cleveland's approach.
- Cleveland CBX ZipCore irons: Cleveland also makes a game-improvement iron built on wedge-design principles (cavity back with a zip core for consistency). Some fitting appointments include these alongside Srixon irons if the golfer is evaluating game-improvement options.
- Srixon golf balls: a minor point, but relevant — Srixon makes the Q-STAR and Z-STAR ball lines, and some authorized fitters include a ball-fitting component (ball spin and launch comparison) as part of a full session.
What happens at a Srixon iron fitting
A Srixon iron fitting follows the same structure as any professional iron fitting — there is no proprietary fitting technology equivalent to Mizuno's Shaft Optimizer. The session is built around launch monitor data and head-to-head shaft testing.
- Model selection: the fitter works through Srixon's current lineup to match iron model to ball-striking level. If you shoot 95-110 and have a mid-high swing speed, the ZX5 Mk II is the likely fit. If you shoot under 85 and prize feel over forgiveness, the ZX7 Mk II is the conversation starter.
- Shaft fitting: Srixon ships their ZX irons with Dynamic Gold and Project X shafts as standard options. A fitting session tests multiple shaft weights, flexes, and profiles on a launch monitor to find the right combination for your swing. The standard shaft options are good, but the real value is testing non-standard options (KBS, True Temper AMT, Nippon N.S. Pro) in the same heads.
- Lie angle: critical for forged irons. Standard Srixon ZX7 Mk II irons can be bent 2–3° flat or upright to spec. A proper lie angle fitting — using a launch monitor and ball flight confirmation, not just a lie board — is worth asking for explicitly.
- Length: standard wrist-to-floor measurement plus launch monitor confirmation. Srixon standard lengths match industry norms.
- Grip size: abbreviated at many sessions. If you have an existing fitting spec that includes grip size, bring it.
What makes Cleveland wedge fitting different
Cleveland's approach to wedge fitting is built around a simple problem most golfers do not realize exists: the standard fitting at most shops tests 2–3 wedge options. Cleveland's authorized fitter network is set up to test many more combinations — specifically, different lofts, bounces, and sole grinds in the same head-and-shaft combo.
- Loft selection: Cleveland wedges run from 46° through 64°. How you fill the gap between your lowest iron and your sand wedge determines which lofts make sense — a typical 3-wedge setup might be 50°, 54°, 58°, but many golfers need 50°, 55°, 60° or some other combination. A proper Cleveland fitting maps your iron lofts first.
- Bounce selection: bounce (the angle between the leading edge and the trailing edge of the sole) governs how the club interacts with turf and sand. High bounce (12–14°) is better for soft conditions, full swings, steep attack angles. Low bounce (4–6°) is better for firm conditions, tight lies, shallow attack angles. Most golfers default to mid bounce and leave strokes on the table.
- Sole grind selection: Cleveland offers four sole grinds — Full, Low, Mid, and High — that change how the leading edge and heel interact with the turf on partial shots. This matters most for good players who hit many partial wedge shots; for higher handicappers, the grind makes less difference.
- Shaft fitting: wedge shafts are often overlooked. Heavier wedge shafts (115–130g) help control distance on partial shots; lighter shafts suit slower swing speeds or players who struggle with wedge consistency. Cleveland tests this directly.
Where to get fitted for Srixon and Cleveland clubs
Neither Srixon nor Cleveland operates dedicated flagship fitting studios in the US — unlike Titleist's TPI centres or TaylorMade's Performance Centers. Fittings happen through three routes:
| Venue type | What you get | Typical cost |
|---|---|---|
| Authorized fitting shop (Srixon/Cleveland dealer) | Full iron and wedge fitting with demo stock across both brands; fitter trained on Srixon/Cleveland range; lie and loft bending available on-site | $75–$150, often waived or credited on purchase |
| Srixon/Cleveland joint fitting event (rep on site) | Srixon rep with full demo cart; broader range of shaft and head options than a standard dealer stock; wedge fitting interchangeable heads available at staffed events | Free–$25, typically applied to purchase |
| Independent multi-brand studio (Club Champion, True Spec, local independents) | Srixon irons tested alongside PING, Titleist, TaylorMade in one session; brand-neutral; no Srixon-specific event discount | $100–$250 depending on scope |
To find an authorized fitter, use the dealer locator on srixon.com or clevelandgolf.com, or browse fitting shops in our directory — independent fitting studios that carry Srixon and Cleveland demo stock are listed by location, services, and ratings.
How much does a Srixon or Cleveland fitting cost?
Fitting costs are consistent with the broader golf club fitting cost range for brand-specific iron and wedge fittings.
| Session type | Typical cost | Notes |
|---|---|---|
| Srixon iron fitting (launch monitor) | $75–$150 | Often waived with purchase; book through an authorized dealer; full session runs 60–90 minutes |
| Cleveland wedge fitting | $50–$100 | Often combined with an iron fitting appointment; standalone wedge fitting runs 45–60 minutes |
| Combined Srixon irons + Cleveland wedges | $100–$200 | Most efficient session; covers all clubs below the driver in one appointment; book 2–2.5 hours |
| Srixon/Cleveland joint fitting event | Free–$25 | Seasonal events at authorized shops; check srixon.com and clevelandgolf.com for dates |
| Driver and fairway wood fitting | $75–$125 | Standard launch monitor process; Srixon's ZX5 driver competes in the mid-handicap distance market |
Srixon-specific fitting vs. multi-brand studio: which is right for you?
The same decision logic that applies to any brand-specific fitting applies here.
- Already decided on Srixon irons or Cleveland wedges: go to an authorized dealer. You will get focused testing across the full range of shaft and head options in those brands, and you may access a fitting event discount. The tradeoff is no cross-brand comparison.
- Undecided on brand: go to an independent multi-brand studio. Ask them to include Srixon irons in the comparison alongside PING, Titleist, and TaylorMade. Good fitters carry Srixon demo stock. The data decides the brand — not the name on the box.
- If you shoot 100+: brand matters less than getting the basics right (length, lie, flex ballpark). Srixon makes good game-improvement irons, but so do their competitors. Focus on finding a fitter you trust, not on the brand they carry.
- If you shoot under 85 and are a ball-striker: Srixon's ZX7 Mk II is exactly the kind of iron this segment cares about — a small, forged, responsive iron. The fitting matters a great deal here because a 2° lie error in a blade-style iron is immediately visible in ball flight. A proper fitting at an authorized Srixon shop is worth the time.
- Cleveland wedges specifically: if you are upgrading your wedges and are open to testing loft, bounce, and grind combinations rather than just picking a model, a Cleveland-specific fitting event is worthwhile regardless of which iron brand you end up with.
Find an authorized Srixon or Cleveland fitting shop near you
Browse fitting studios in our directory — including independent shops that carry Srixon and Cleveland demo stock — with ratings, services, and contact details.
What to bring and what happens after the fitting
Before your session, read how to prepare for a golf club fitting for a full checklist. For a Srixon iron fitting specifically: bring the clubs you currently play, know your 7-iron carry distance (an honest average, not your best-ever shot), and be ready to describe your typical miss — whether you block irons right, pull them, hit them thin, or hit them fat.
After the fitting, Srixon irons are built to your spec by their custom shop. Standard lead times for Srixon custom irons run 2–4 weeks from order to delivery. Cleveland wedges with custom specs (non-stock loft, bounce, or grind combos) typically take 1–3 weeks. If you are fitting before a trip or a season-start deadline, factor this into your timeline.
If the fitting reveals that your current irons just need a lie angle correction rather than replacement, that is worth knowing. Many golfers who come in thinking they need new irons find that bending their existing set 1–2° solves the miss pattern. The loft and lie adjustment guide explains when adjusting your existing clubs is the right move.